Brake Pad for TOYOTA, PONTIAC SCION Japanese Series Rear ECE R90

Brake Pad Features

• Stop-and-go traffic reveals everything about a brake pad. The constant cycling—accelerate, brake, accelerate, brake—creates heat, generates dust, and tests the pad's ability to engage smoothly every single time. A pad that squeals at every light, that coats wheels in black dust, that feels grabby or inconsistent—that pad fails the urban test. This pad was designed to pass it. The friction formulation is optimized for the thermal cycling of city driving, maintaining its bite stop after stop without the glazing that causes noise. The binder system resists the temperature buildup that leads to fade. And the dust generation is minimized, preserving the appearance of Toyota, Pontiac, and Scion alloy wheels.

• The rear axle of a front-wheel-drive vehicle sees less braking force than the front, but it sees a different kind of stress. The rear brakes are used less frequently, which means they can develop a glaze from infrequent use. They are exposed to more road spray, which means they face more corrosion risk. And they are subject to the parking brake mechanism, which applies sustained pressure when the vehicle is parked. This pad addresses those challenges through a formulation that resists glazing, a backing plate that resists corrosion, and a wear characteristic that remains consistent regardless of use frequency. For drivers who put miles on their vehicles, this reliability is essential.

• The dimensions—98.6mm in length, 42.2mm in width, 15mm in thickness—are engineered to match the caliper specifications of Toyota, Pontiac, and Scion rear brake systems. The fit is precise, the alignment is correct, and the installation is straightforward. No grinding, no shims, no creative adaptation. The pad bolts on, the caliper closes, and the brakes perform as designed. For independent workshops, this means the job stays within the time estimate. For drivers, it means the brakes work as intended.

• The three material options available for this pad line—semi-metallic, low-steel, and ceramic—offer different performance characteristics for different driving priorities. The semi-metallic formulation delivers the durability and cost-effectiveness that fleet operators and high-mileage drivers value. The low-steel formulation provides the bite and fade resistance that performance-oriented drivers demand. And the ceramic formulation offers the quiet operation and minimal dust that luxury-oriented drivers prefer. Each formulation is ECE R90 certified, ensuring that the pad meets the braking performance standards required for European aftermarket use.

• The thermal stability of this pad is validated across a temperature range of -50°C to 700°C. In the cold of a northern winter, when the pad is frozen and the disc is cold, the friction coefficient remains consistent. In the heat of a summer traffic jam, when the brakes are used repeatedly and the disc is hot, the friction coefficient remains stable. The pad does not lose its bite when it is cold, and it does not fade when it is hot. For drivers who encounter diverse conditions—from snowy highways to desert roads—this thermal stability delivers consistent stopping power.

• The noise suppression of this pad is achieved through a combination of design and material selection. The chamfered edges disrupt the harmonic vibrations that cause squeal, while the multi-layer shim system absorbs the high-frequency oscillations that can transmit through the suspension. The result is a pad that brakes quietly, preserving the cabin environment that drivers value. For families who spend hours on the road, this acoustic refinement reduces fatigue and enhances the enjoyment of the journey.

• The low-dust characteristic of the ceramic and low-steel formulations is particularly relevant for Toyota, Pontiac, and Scion owners. The vehicles' alloy wheel designs show brake dust more prominently than simpler designs, and the dust can be difficult to remove if it bonds to the wheel surface. This pad generates a light-colored residue that rinses away with water, without the scrubbing that can damage wheel finishes. For drivers who take pride in their vehicle's appearance, this means less time spent cleaning and more time enjoying the drive.

• The Scion brand, now part of Toyota's heritage, represents a focus on youthful, sporty driving. This pad line honors that focus through its low-steel and semi-metallic formulations, which deliver the pedal feel and stopping power that Scion drivers appreciate. The pad provides the firm, linear response that makes driving engaging, without the compromises that can come with lower-quality aftermarket components. For Scion owners who value performance, this pad is the natural choice for brake maintenance.

• The ECE R90 certification confirms that this pad meets the braking performance standards for European aftermarket use, with documented dynamometer testing for friction coefficient, speed sensitivity, and thermal stability. The IATF 16949-certified production facility ensures consistent quality and dimensional accuracy. The ISO14001 and ISO45001 certifications cover the environmental and occupational aspects of production. Whether destined for a Toyota sedan, a Pontiac coupe, or a Scion hatchback, this pad arrives with the traceability and documentation that professional buyers require—a rear brake component engineered for the reliability and performance that define the Japanese Series.

Tailored for Toyota, Pontiac, and Skoda models, these rear brake pads are the ideal choice for every driver seeking an exceptional driving experience. We understand that in congested urban traffic, you need a reliable, quiet, and high-performance braking system.

  Not only do these brake pads meet stringent ECE R90 certification standards, but they also showcase exceptional engineering quality:

• Ultra-low noise design eliminates irritating brake squeal

• Minimal dust emission keeps wheels clean and bright

• Exceptional durability for extended service life

• Precise braking ensures every stop is safe and smooth

  Whether for daily commutes or urban driving, these brake pads will become the perfect companion for your vehicle. Safety, quietness, and efficiency—a trinity of driving assurance!

Upgrade now and experience ultimate driving pleasure!

• 100% critical dimensions, runout and DTV inspection 

• Material physical and chemical inspection

• Test shear strength, compressibility, density, flatness and parallelism 

• Test performance and noise/NVH