NEWS DETAIL
Home / News / Advantages and assembly steps of Bi-metal Brake Disc

Advantages and assembly steps of Bi-metal Brake Disc

Views: 0     Author: Site Editor     Publish Time: 2025-03-19      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Advantages and assembly steps of Bi-metal Brake Disc

Bi-metal Brake Disc is a brake disc made of two different materials, usually made of cast iron and aluminum alloy. Here is more information about Bi-metal Brake Discs.

Here is the content list:

  • Advantages of the Bi-metal Brake Disc

  • Assembly steps of the Bi-metal Brake Disc

Advantages of the Bi-metal Brake Disc

Compared with traditional brake discs made of a single material, Bi-metal Brake Discs have the following advantages:

  1. Superior Quality: The bi-metal construction ensures that the brake disc is made from top-quality materials, providing improved performance and greater durability than traditional metal discs.

  2. Better Heat Dissipation: The bi-metal construction allows for better heat dissipation due to its ability to withstand high temperatures and its increased surface area, which helps dissipate heat more efficiently.

  3. Longer Life Span: By having two different metals in the construction of a brake disc, its life span is increased as compared to conventional metal discs, allowing for longer periods of use and fewer replacements over time.

  4. Cost Savings: Due to its superior quality, longevity, and improved efficiency, a Bi-metal Brake Disc is more cost-effective than traditional discs in the long run by requiring less maintenance or replacement over the product's lifespan.

  5. Improved Stopping Power: As a result of the improved heat dissipation capabilities inherent in the bi-metal construction of a brake disc, it improves braking power as well as control and stops significantly shorter than competing products due to its higher friction coefficient when compared with conventional discs.

Assembly steps of the Bi-metal Brake Disc

The following are the assembly steps for a Bi-metal Brake Disc:

  1. Gather the necessary tools, such as a wrench, torque wrench, and brake clamp, along with your Bi-metal Brake Disc.

  2. Before assembly check the brake disc for any damage or cracking, if present replace it with a new one before continuing.

  3. Place the brake disc on the mounting frame and the brake clamp onto it, according to the manufacturer's recommendations and torque specifications secure this clamp using a torque wrench.

  4. Make sure that the disc is aligned properly with your axle’s axis by tightening up your lug nuts, using a wrench set at the specified value given by the manufacturer.

  5. Pay close attention when installing not to use loose hardware, which could cause danger during high-speed driving as they are likely to come off due to force created during those moments of acceleration.

  6. Upon installation of your new Bi-metal Brake Disc conduct tests on your braking system, to assure that everything is mounted correctly and will provide you (the driver) with proper braking capacity effectively.

  7. If you feel uncertain about completing the installation, seek consultation from an experienced technician, or read through the manufacturer's instructions provided with the product delivery package for guidance on correct assembly methods and processes.

It is important to remember that improper installation of these brakes can create adverse safety risks. Therefore if you are not confident about successful installation please refer to obtaining professional assistance or visit specialized repair services for help on completing the setup accurately.

The above is about the advantages and assembly of a Bi-metal Brake Disc. If you are interested in the Bi-metal Brake Disc, please visit Wihere’s website, our website is https://www.winhere.com/.

Home / News / Advantages and assembly steps of Bi-metal Brake Disc

WINHERE AUTO-PART MANUFACTURING CO., LTD.

Address: No.80, Taishan Road, ETDZ of Yantai , China

Tel: 0086-532-85761111   |   Fax: 0086-532-85768370     |    Email: autoparts@winhere.com.cn

Copyright © 2020 Winhere Auto-Part Manufacturing Co., Ltd.